Skip to content

Old Drywall Patch and DIY Repair Fixes in Massillon

You filled that hole yourself, and it looked fine in the garage light. Then the sun came through the window. We rebuild old patches until they disappear.

Side-lit wall showing a lumpy old patch next to a repaired section that now sits flat

Why old patches show

Patches show because of a few repeatable mistakes, and they're easy to make:

  • The compound was laid on thick and has a hump or ridge
  • The edges weren't feathered out far enough, so the patch has a visible border
  • Spackle was used on a bigger hole, and it cracked or sank
  • The patch was never primed, so paint soaks in differently there (we call that flashing)
  • The texture doesn't match, either too smooth or too heavy

We start with a flashlight

A trick we use: hold a flashlight flat against the wall and drag it across. Every bump and dip lights up. That's what you see in the afternoon, and it's what we check before we start and again before we leave.

From there, we decide whether to sand and skim the patch, or whether it needs to be cut out and rebuilt. If it's cracking or loose, rebuilding is the honest fix. If it's only bumpy, we can often flatten it with a skim coat that goes beyond the edges.

What the rework involves

  1. Scrape and sand. We take the high spots down and test the patch for solidity.
  2. Fix what's loose. Anything that flexes, cracks or sounds hollow gets cut out and replaced.
  3. Skim wide. We apply thin, wide coats so the edges melt into the wall.
  4. Prime. A sealing primer stops paint from sinking in at different rates.
  5. Texture. We re-create the surrounding texture and blend it out.

Why Massillon has so many of these

Owners who do their own work. About 65 percent of Massillon homes are owner-occupied, and plenty of owners fix things themselves. That's a good thing; it's also why we see patches.

A city with a long past. James Duncan recorded the town in 1826 and it became a city in 1868, so the oldest neighborhoods have gone through many owners. Each of them has probably patched something.

Lots of mid-century walls. With the typical home dating to about 1957, many walls have been patched several times over. Old repairs pile up, and we pull them apart carefully.

Patch questions

Can you just paint over a lumpy patch?

Paint highlights lumps. The patch has to be flattened first.

What if the original patch used the wrong material?

We deal with that often. We test it and, if needed, replace it.

Will you match the paint, too?

We prime and leave you paint-ready. We can look at the sheen so you know what to buy.

Is it worth fixing a patch in a rental?

Sure. A flat wall repaints better and cleans up better.

When a patch can't be saved

Sometimes a skim coat isn't enough. If the old patch is cracking, sounds hollow or has mesh sticking out, we cut it back and rebuild the spot with a proper backer. That's more work than a skim, but it's the only repair that stays put.

We'll tell you which one we think yours is, and why, after we've had a look at it in side light.

Help us out beforehand

These small things make a big difference:

  • Take a photo with a flashlight dragged along the wall, since it shows the bumps
  • Tell us what you used: spackle, joint compound, mesh patch or something else
  • Keep any leftover paint, since the label helps us understand the sheen
  • Clear a few feet in front of the wall

Ready when you are

Send us a photo of the fixing old patches and diy repairs and we'll talk it through.

Got a wall that needs fixing?

Send us a photo and a line or two about what happened. We'll chat about the fix.

CallText us